Revel SA1000 Amplifier
RVL-SA1000
General Specifications:
- Rated Output Power (RMS) into the minimum impedance of 4 ohms 700 Watts (350W per Subwoofer)
- Peak Power 1500 Watts (750W per Subwoofer)
- Rated Impedance 8 Ohms per speaker output
- Minimum Load Impedance 4 Ohm
- Model-Specific EQ 1 Only for Revel B28C; 2 Only for Revel B28W
- Input Sensitivity to 1W @ 50HZ 16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB
- Input Overload (Both Inputs Driven) 2.0Vrms
- Input Impedance >10K Ohms
- Low Pass Crossover Range 50-150Hz
- Auto Turn On Input Sensitivity @ 50Hz Typical 10mV
- THD+N At 1W <0.3%
- THD+N At Rated Output Power <1%
- Signal-to-Noise Ratio To 1W >65dBA
- Minimum AC Mains Power Requirements Model 700W, 5A – 100-120VAC-50-60Hz
- Minimum AC Mains Power Requirements Model 700W, 3A – 230VAC-50-60Hz
- Power Consumption (Standby) 0.5W
- Height 3.50in (88.90mm)
- Width 17in (431.8mm)
- Depth 11.04in (280.3mm)
- Weight 14 lb (6.35kg)
Audio Specifications:
- Rated Output Power (RMS) into the minimum impedance of 4 ohms 700 Watts (350W per Subwoofer)
- Peak Power 1500 Watts (750W per Subwoofer)
- Rated Impedance 8 Ohms per speaker output
- Minimum Load Impedance 4 Ohm
- Model-Specific EQ 1 Only for Revel B28C; 2 Only for Revel B28W
- Input Sensitivity to 1W @ 50HZ 16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB
- Input Overload (Both Inputs Driven) 2.0Vrms
- Input Impedance >10K Ohms
- Low Pass Crossover Range 50-150Hz
- Auto Turn On Input Sensitivity @ 50Hz Typical 10mV
- THD+N At 1W <0.3%
- THD+N At Rated Output Power <1%
- Signal-to-Noise Ratio To 1W >65dBA
- Minimum AC Mains Power Requirements Model 700W, 5A – 100-120VAC-50-60Hz
- Minimum AC Mains Power Requirements Model 700W, 3A – 230VAC-50-60Hz
- Power Consumption (Standby) 0.5W
- Height 3.50in (88.90mm)
- Width 17in (431.8mm)
- Depth 11.04in (280.3mm)
- Weight 14 lb (6.35kg)